McDermott has the reach, capabilities and experience to provide the world’s largest energy companies with the technology, engineering and construction solutions for their most complex projects. We take pride in providing certainty and delivering the highest quality solutions on schedule—we call it the “One McDermott Way.”

People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.

Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing offshore platforms hundreds of miles from shore, and using our expertise to design and build offshore wind infrastructure.

For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Here, what you do matters.



Job Overview:

The Principal Piping Designer performs Design and Engineering process facilities within a specified time while adhering to maintenance, safety and quality standards, consider constructability, economics and operation into account during Pre-FEED, FEED or Detailed Design phases. Develop 3D Models and ensure clash free model in coordination with all other disciplines requirements. Approve drawing including plot plans as per project specifications, McDermott Procedures, Process Design practice. Completes assignments and facilitates the work activities of others. Set priorities, organize own work and time to meet objectives, and (as Lead Designer) forecast and plan resource requirements.

When acting as Lead Designer, in addition: Lead the design team to complete the tasks within the planned schedule and budget, in accordance with standards, McDermott and project-specific procedures. Act as project-based discipline point of contact in communications and meetings with Project Team, Client, vendor/supplier and/or subcontractor counterparts. Ensure that the inter-discipline aspects of the design and deliverables are addressed. Support Lead Piping Engineer in measuring the progress and productivity. Coordinate all activities within own discipline and discipline interfaces with other disciplines. Ensures effective communications among other disciplines and effective management of change. Coordinate 3D Model Reviews and ensure Review comments are closed.

RESPONSIBILITIES
Key Tasks and Responsibilities:

Perform Design and Engineering process facilities within a specified time while adhering to maintenance, safety, and quality standards, consider constructability, economics, and operation into account during Pre-FEED, FEED, or Detailed Design phases
Develop 3D Models and ensure clash free model in coordination with all other disciplines requirements,
Approve drawing including plot plans as per project specifications, McDermott Procedures, Process Design practice
Complete assignments and facilitate the work activities of others
Set priorities, organize own work and time to meet objectives, and (as Lead Designer) forecast and plan resource requirements
When acting as Lead Designer, in addition:
Lead the design team to complete the tasks within the planned schedule and budget, in accordance with standards, McDermott, and project-specific procedures
Act as project-based discipline point of contact in communications and meetings with Project Team, Client, vendor/supplier, and/or subcontractor counterparts
Ensure that the inter-discipline aspects of the design and deliverables are addressed
Support Lead Piping Engineer in measuring the progress and productivity
Coordinate all activities within own discipline and discipline interfaces with other disciplines
Ensures effective communications among other disciplines and effective management of change
Coordinate 3D Model Reviews and ensure Review comments are closed
Is fully familiar with the Project Scope of work, specifications, schedule, and inter-discipline requirements
Develop Plant Design and 3D Modelling, Drawings in accordance with work hours and schedule
Add input into the Plant Layout Narrative in accordance with the agreed Scope of work
Identify issues as soon as they arise and follow up with any required corrective action
Identify changes to scope and promptly raise change notifications in the Change Management System
When acting as Lead Designer, assist the Lead Piping Engineer in raising technical queries, preparing the piping estimate and job scope changes
Attend project Kickoff, Review meetings, Vendor meetings, model reviews
When acting as Lead or area lead, monitor and coordinate the design team (remotely if required)
When acting as Lead or area lead, lead the project in a Multi Office Project Execution Environment (MOPEX)
Support and supervise less-experienced members within the design team
Ensure that the work is carried out in accordance with McDermott requirements, Client and Statutory Design Codes, Standards, or Procedures with a particular focus on Health and Safety Policies
Support the Department Manager with the Designer's appraisals
Exercise judgment, based on previous experience, practices, and precedents, to identify and solve problems that arise with little or no precedent
Exchange ideas and information effectively and is direct when dealing with others
Reports to:

Project: Lead Piping Engineer, Lead Piping Designer

Functional: Supervising Department Manager

Liaise With: Lead Designers, Engineers, all other Engineering disciplines Leads assigned to the project, Project Engineer, IM Group, Document Control, and Client representatives. Lead Designers and Designers, Engineers, other Engineering and Design disciplines assigned to the project, Project Engineer, IM Group, Document Control, and Client representatives

Supervises: Piping Design team assigned to a project or part of the project during the detailing and production phases

QUALIFICATIONS
Essential Qualifications and Education:

15 years min with major contractor or consultant of which 10+ years of experience in oil and gas performing Pre-FEED, FEED and Detailed Design
High School graduate with a diploma in Mechanical Design, or Drafting in a related discipline or equivalent experience
Detailed knowledge of 3D CAD system including E3D or SP3D
Minimum 1 or 2 projects working experience in E3D and/or S3D
Detailed knowledge of AutoCAD and/or Auto lisp
Familiar with the associated local regulatory environment and international and national industry standards and specifications
Capable of Leading projects
General understanding of how process equipment is maintained and operated
Programming, 3D Modeling, Menu, and/or Macro compilation skills would be an advantage
Flexible for business traveling/assignments
Knowledge of QA Systems and a good communicator

Job Title Principal Piping Designer Job Description People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing offshore platforms hundreds of miles from shore, and using our expertise to design and build offshore wind infrastructure. For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries. Here, what you do matters. Job Overview: The Principal Piping Designer performs Design and Engineering process facilities within a specified time while adhering to maintenance, safety and quality standards, consider constructability, economics and operation into account during Pre-FEED, FEED or Detailed Design phases. Develop 3D Models and ensure clash free model in coordination with all other disciplines requirements. Approve drawing including plot plans as per project specifications, McDermott Procedures, Process Design practice. Completes assignments and facilitates the work activities of others. Set priorities, organize own work and time to meet objectives, and (as Lead Designer) forecast and plan resource requirements. When acting as Lead Designer, in addition: Lead the design team to complete the tasks within the planned schedule and budget, in accordance with standards, McDermott and project-specific procedures. Act as project-based discipline point of contact in communications and meetings with Project Team, Client, vendor/supplier and/or subcontractor counterparts. Ensure that the inter-discipline aspects of the design and deliverables are addressed. Support Lead Piping Engineer in measuring the progress and productivity. Coordinate all activities within own discipline and discipline interfaces with other disciplines. Ensures effective communications among other disciplines and effective management of change. Coordinate 3D Model Reviews and ensure Review comments are closed. RESPONSIBILITIES Key Tasks and Responsibilities: Perform Design and Engineering process facilities within a specified time while adhering to maintenance, safety, and quality standards, consider constructability, economics, and operation into account during Pre-FEED, FEED, or Detailed Design phases Develop 3D Models and ensure clash free model in coordination with all other disciplines requirements, Approve drawing including plot plans as per project specifications, McDermott Procedures, Process Design practice Complete assignments and facilitate the work activities of others Set priorities, organize own work and time to meet objectives, and (as Lead Designer) forecast and plan resource requirements When acting as Lead Designer, in addition: Lead the design team to complete the tasks within the planned schedule and budget, in accordance with standards, McDermott, and project-specific procedures Act as project-based discipline point of contact in communications and meetings with Project Team, Client, vendor/supplier, and/or subcontractor counterparts Ensure that the inter-discipline aspects of the design and deliverables are addressed Support Lead Piping Engineer in measuring the progress and productivity Coordinate all activities within own discipline and discipline interfaces with other disciplines Ensures effective communications among other disciplines and effective management of change Coordinate 3D Model Reviews and ensure Review comments are closed Is fully familiar with the Project Scope of work, specifications, schedule, and inter-discipline requirements Develop Plant Design and 3D Modelling, Drawings in accordance with work hours and schedule Add input into the Plant Layout Narrative in accordance with the agreed Scope of work Identify issues as soon as they arise and follow up with any required corrective action Identify changes to scope and promptly raise change notifications in the Change Management System When acting as Lead Designer, assist the Lead Piping Engineer in raising technical queries, preparing the piping estimate and job scope changes Attend project Kickoff, Review meetings, Vendor meetings, model reviews When acting as Lead or area lead, monitor and coordinate the design team (remotely if required) When acting as Lead or area lead, lead the project in a Multi Office Project Execution Environment (MOPEX) Support and supervise less-experienced members within the design team Ensure that the work is carried out in accordance with McDermott requirements, Client and Statutory Design Codes, Standards, or Procedures with a particular focus on Health and Safety Policies Support the Department Manager with the Designer's appraisals Exercise judgment, based on previous experience, practices, and precedents, to identify and solve problems that arise with little or no precedent Exchange ideas and information effectively and is direct when dealing with others Reports to: Project: Lead Piping Engineer, Lead Piping Designer Functional: Supervising Department Manager Liaise With: Lead Designers, Engineers, all other Engineering disciplines Leads assigned to the project, Project Engineer, IM Group, Document Control, and Client representatives. Lead Designers and Designers, Engineers, other Engineering and Design disciplines assigned to the project, Project Engineer, IM Group, Document Control, and Client representatives Supervises: Piping Design team assigned to a project or part of the project during the detailing and production phases QUALIFICATIONS Essential Qualifications and Education: 15 years min with major contractor or consultant of which 10+ years of experience in oil and gas performing Pre-FEED, FEED and Detailed Design High School graduate with a diploma in Mechanical Design, or Drafting in a related discipline or equivalent experience Detailed knowledge of 3D CAD system including E3D or SP3D Minimum 1 or 2 projects working experience in E3D and/or S3D Detailed knowledge of AutoCAD and/or Auto lisp Familiar with the associated local regulatory environment and international and national industry standards and specifications Capable of Leading projects General understanding of how process equipment is maintained and operated Programming, 3D Modeling, Menu, and/or Macro compilation skills would be an advantage Flexible for business traveling/assignments Knowledge of QA Systems and a good communicator Post Details

Job Start Date Salary from 0.00 Salary to 0.00 Number of Vacancies 1 Location Job Location -> UAE Dubai Location City Dubai

Desired Candidate's Profile Gender No Preference Nationality Candidate Current Location Work Experience 1-2 Years Candidate Profile Description Job Classification Job Type Job Type -> Full-time Industry Type Job Industry -> Engineering Job Function Job Functions -> Risk Management Employers Details Company Mc Dermott Contact Person Designation Telephone 2815885636 Email RReidMcDermott.com