McDermott has the reach, capabilities and experience to provide the world’s largest energy companies with the technology, engineering and construction solutions for their most complex projects. We take pride in providing certainty and delivering the highest quality solutions on schedule—we call it the “One McDermott Way.”

People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.

Our ingenuity fuels daily life. Together, weve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing offshore platforms hundreds of miles from shore, and using our expertise to design and build offshore wind infrastructure.

For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Here, what you do matters.



Job Overview:

Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes and standards.

RESPONSIBILITIES
Key Tasks and Responsibilities:

Direct Engineering team as a Project coordinator on small projects
Apply knowledge and skills to a wide range of standard and nonstandard situations
Prepare clear and accurate detailed design calculations and analyses including design reports and procedures
Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area
Clearly communicate and explain complex issues and work to establish understanding
Be fully familiar with the project scope of work, specifications, schedule and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.
Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates. Provide similar support for Variation Orders
Interface with all disciplines to develop clash free designs
Interface with other departments to obtain input for discipline designs and drawings
Maintain close co-operation with other engineering disciplines, Planning, Fabrication, Marine and Project Management Team, as required
Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager
Assist in preparation of estimates for bid proposals, including technical query reviews, execution statements and manhour estimates
Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred Mcdermott procedures, specifications, standards, practices, and operational requirements
Prepare Discipline engineering design basis, philosophies, and technical specifications, as required
Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity
Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys, as required
Provide technical direction and review of Designers producing products related to Construction/Installation Support Engineering
Prepare and review design reports and procedures
Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their deliverables
When assigned, assist procurement personnel in producing Discipline equipment, materials, and services; ensuring that work produced complies with customer objectives and procedures. Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer
Check engineering performed by others within Discipline
Perform design verification through single -discipline check/inter-discipline check (IDC)
Provide technical support to all fabrications queries, including identifying defect/rectification requirements
Keep the Lead engineer apprised of all activities and concerns, technical, budgetary and manpower related
Assist in providing inputs for actual, planning and forecasting progress reports including associated productivity
Participate in internal, Customer and third-party technical audits on engineering deliverables and vendor documents
Assist Lead engineer with responses to Customer and other agencies(such as certifying authorities, auditors, third parties, etc.) on their review and approval.
Capture lessons learned and enter into MDRs Lessons Learned system
Act as a resource for colleagues with less experience
Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.
Be aware of costs related to own work and of the discipline
In Fab CSE, perform/ review designs, analyses, evaluations, calculations and procedures such as:
Erection sequences for jackets, topsides, and other structures
Loadout procedures and guidance during the operations
Construction lift analyses and procedures for activities such as float over, stackings roll-ups, etc.
Weighing procedures
Design and detailing of miscellaneous fabrication yard items
Crane arrangements and rigging arrangements
Trailer arrangements/operations, including drawings and procedures
Assist Lead Engineer in coordinating critical operations pre-activity meetings and attend yard critical operations
Additional skills (preferred, not mandatory) - perform/review PipelineInstallation Engineering designs, analyses, evaluations, calculations and procedures for transportation and installation:
Submarine pipelines
Risers
Spools
PLETS and manifolds
Cables
Additional skills (preferred, not mandatory) - perform/review Structural Installation Engineering designs, analyses, evaluations, calculations and procedures for loadout, transportation and installation of offshore structures, including barge upgrades/modifications
Additional skills (preferred, not mandatory) - perform /review Naval Architecture Engineering designs, analysis, evaluations, calculations and procedures related to all aspects of marine operations covering loadout, transportation, and installation

Job Title Senior Construction Support Engineer Vessel Modification Job Description People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, weve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing offshore platforms hundreds of miles from shore, and using our expertise to design and build offshore wind infrastructure. For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries. Here, what you do matters. Job Overview: Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes and standards. RESPONSIBILITIES Key Tasks and Responsibilities: Direct Engineering team as a Project coordinator on small projects Apply knowledge and skills to a wide range of standard and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and procedures Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area Clearly communicate and explain complex issues and work to establish understanding Be fully familiar with the project scope of work, specifications, schedule and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues. Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates. Provide similar support for Variation Orders Interface with all disciplines to develop clash free designs Interface with other departments to obtain input for discipline designs and drawings Maintain close co-operation with other engineering disciplines, Planning, Fabrication, Marine and Project Management Team, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager Assist in preparation of estimates for bid proposals, including technical query reviews, execution statements and manhour estimates Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred Mcdermott procedures, specifications, standards, practices, and operational requirements Prepare Discipline engineering design basis, philosophies, and technical specifications, as required Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Construction/Installation Support Engineering Prepare and review design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their deliverables When assigned, assist procurement personnel in producing Discipline equipment, materials, and services; ensuring that work produced complies with customer objectives and procedures. Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer Check engineering performed by others within Discipline Perform design verification through single -discipline check/inter-discipline check (IDC) Provide technical support to all fabrications queries, including identifying defect/rectification requirements Keep the Lead engineer apprised of all activities and concerns, technical, budgetary and manpower related Assist in providing inputs for actual, planning and forecasting progress reports including associated productivity Participate in internal, Customer and third-party technical audits on engineering deliverables and vendor documents Assist Lead engineer with responses to Customer and other agencies(such as certifying authorities, auditors, third parties, etc.) on their review and approval. Capture lessons learned and enter into MDRs Lessons Learned system Act as a resource for colleagues with less experience Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc. Be aware of costs related to own work and of the discipline In Fab CSE, perform/ review designs, analyses, evaluations, calculations and procedures such as: Erection sequences for jackets, topsides, and other structures Loadout procedures and guidance during the operations Construction lift analyses and procedures for activities such as float over, stackings roll-ups, etc. Weighing procedures Design and detailing of miscellaneous fabrication yard items Crane arrangements and rigging arrangements Trailer arrangements/operations, including drawings and procedures Assist Lead Engineer in coordinating critical operations pre-activity meetings and attend yard critical operations Additional skills (preferred, not mandatory) - perform/review PipelineInstallation Engineering designs, analyses, evaluations, calculations and procedures for transportation and installation: Submarine pipelines Risers Spools PLETS and manifolds Cables Additional skills (preferred, not mandatory) - perform/review Structural Installation Engineering designs, analyses, evaluations, calculations and procedures for loadout, transportation and installation of offshore structures, including barge upgrades/modifications Additional skills (preferred, not mandatory) - perform /review Naval Architecture Engineering designs, analysis, evaluations, calculations and procedures related to all aspects of marine operations covering loadout, transportation, and installation Post Details

Job Start Date 1970-01-01 Salary from 0.00 Salary to 0.00 Number of Vacancies 1 Location Job Location -> UAE Dubai Location City Dubai

Desired Candidate's Profile Gender No Preference Nationality Candidate Current Location Work Experience 1-2 Years Candidate Profile Description Job Classification Job Type Job Type -> Full-time Industry Type Job Industry -> Construction Job Function Job Functions -> Quality Assurance Employers Details Company Mc Dermott Contact Person Designation Telephone 2815885636 Email RReidMcDermott.com